Handheld UV Laser Marking Machine 3W 5W Air-Cooled
355 nm UV at 3 W or 5 W, air-cooled with no water line, running on a 24 V lithium battery. 100 x 100 mm area, 0.002 mm repeatability, 0.1 mm minimum line width, 0.15 mm minimum character, 11.85 kg total with an 8 kg marking head – cold marking straight onto glass, plastic and ceramic.

355 nm UV laser, 3 W / 5 W, M² ≤ 1.4, and ≤3% power fluctuation. Delivers 0.002 mm repeatability and fine, clear marking.
Air-cooled, no chiller or water lines. Built-in 24 V battery supports 2–3 hours of operation and charging while working.
8-core Linux system with touchscreen and USB import. Supports text, graphics, QR codes, barcodes, and serial marking, with customizable languages.
A handheld air-cooled UV laser marker at 355 nm in 3 W and 5 W versions. The unit is air-cooled with no water circuit, runs 2-3 hours on a 24 V lithium battery and accepts charge while marking. The field is 100 x 100 mm with 0.002 mm repeatability, a 0.1 mm minimum line width and 0.15 mm minimum character, at up to 10000 mm/s. A Linux system on an eight-core processor with a touch interface and USB import lays out text, graphics, QR codes, barcodes and serial numbers on the machine. The head weighs 8 kg and the complete unit 11.85 kg, on a 110-220 V input, for on-site marking of glass, plastic, ceramic, acrylic and FPC.
| Parameter | Specification |
| Laser type / wavelength | UV laser, 355nm |
| Laser power | 3W (Q8V-3) / 5W (Q8V-5) |
| Beam quality | M² ≤ 1.4 |
| Repetition frequency | 10-150kHz |
| Power stability | ≤ ±3% (24h) |
| Marking area | 100 × 100mm |
| Repeat positioning accuracy | ±0.002mm |
| Min. line width | 0.1mm |
| Min. character height | 0.15mm |
| Engraving depth | < 1mm (power and time dependent) |
| Engraving speed | ≤ 10000mm/s |
| Cooling | Air cooling |
| Battery | 24V lithium, 2-3h runtime, charge while running |
| Power input | 110-220V, 50Hz |
| Operating environment | 0-40℃, 30-85% RH, no oil mist or condensation |
| Control system | Linux, eight-core processor, touch interface, USB import |
| Marking content | Text, graphics, QR code, barcode, serial no., date, batch |
| Dimensions (head) | 165 × 485 × 370mm |
| Dimensions (control box) | 138 × 255 × 200mm |
| Weight | 8kg head / 11.85kg total |

Weight you can actually carry
11.85 kg for the complete set and 8 kg for the marking head. One person lifts it onto a stand, a bench or a machine frame, marks the part and moves on – no bench, no water line, no fixed station.
355 nm UV source: a spot fine enough for detail
The source runs at 355 nm, the industrial UV wavelength, focused to a small spot. That is what puts fine detail on plastics, glass and ceramics, and on coatings a fiber laser would scorch.


24 V battery: two to three hours off the grid
A 24 V lithium pack gives 2-3 hours of work with no cable at all. Production line, warehouse, exhibition stand or rooftop: the machine travels to the part instead of the part travelling to a bench.
Charge while marking: no midday stop
Power control is built into the unit, so it charges while it marks. A shift does not pause for a battery swap – plug in at the bench and keep running.


Auto sleep after 60 s: idle time stops costing power
The screen sleeps after 60 seconds idle and wakes on a touch, and the delay is configurable. Idle hours stop drawing power, and the panel is spared the hours it would otherwise stay lit.
Eight-core CPU on Linux: a controller that does not hang
An eight-core processor runs a Linux system on the machine itself. Files open quickly, the interface answers immediately, and there is no separate Windows PC to catch a virus or freeze halfway through a batch.


One file, every mark type
Rear USB import, then text, graphics, QR codes, barcodes, serial numbers and counters are laid out on the touch interface. The interface language can be customized for the market the machine is sold into.
Sealed scan head: nothing to adjust
The scan head is a sealed galvo unit with no user adjustment and no routine maintenance. The same mounting takes a high-speed digital head when throughput starts to matter more than cost.

Materials and process fit
| Material | Typical work | What the machine does | Note |
| Glass / crystal | Bottles, awards, panels | The short wavelength acts at the surface without cracking | Keep the focus on curved faces |
| Plastic (ABS / PC / PP) | Housings, keys, labels | Cold process, no burnt edge, no deformation | Light colours give the best contrast |
| Ceramic | Electronic ceramics, tableware | No chipping, fine lines are possible | Glazed surfaces take the finest detail |
| Acrylic / PMMA | Panels, display parts | Frosts white with a crisp edge | Depth follows passes and speed |
| Flexible PCB / FPC | Board text, QR codes | Leaves traces and coverlay intact | Stay off pads and gold fingers |
| Leather / wood | Packaging, gifts | No burnt smell, edges do not curl | Dark materials give lower contrast |
| Metal nameplate / anodised aluminium | Nameplates, panels | Removing the oxide layer creates the contrast | Thick metal is not this machine’s job |
Marking Samples
Related Products
Send us an email to get further information you need, including our latest price, the best-customized solution, or any problem with the existing machine.
Related Products
Send us an email to get further information you need, including our latest price, the best-customized solution, or any problem with the existing machine.































