Platform Large-Format Pulse Laser Cleaning Machine
A gantry platform pulse laser cleaner: 1200×1200 mm table, 100-1000 W, path and energy locked by program, +/-0.01 mm repeatability, over 30 m2/h, Sa2.5/Sa3.
Offers 100–1000 W power at 1080 nm, with adjustable 30–500 ns pulse width, 1–4000 kHz frequency, and 1.5–100 mJ pulse energy to handle everything from thin oxide to heavy rust and old paint.
Features a standard 1200 × 1200 mm table, cleaning speeds above 30 m²/h, and Sa2.5–Sa3 surface cleanliness for demanding coating preparation.
Uses a dual-drive gantry, linear guides, and a Z-axis ball screw to achieve ±0.01 mm accuracy. Three axes come standard, with optional five- or six-axis configurations for cleaning complex surfaces, cavities, and slopes.
ðLO 
Gantry platform pulse laser cleaner: 1200×1200 mm table, 100-1000 W at 1080 nm, JPT source, HIWIN/THK/PMI rails, Panasonic/Yaskawa servos, +/-0.01 mm repeatability, over 30 m2/h, Sa2.5/Sa3.
| Group | Parameter | Value |
| A Optics | Laser Type | Pulsed Fiber Laser |
| A Optics | Rated Power | 100 / 200 / 250 / 300 / 500 / 1000W |
| A Optics | Central Wavelength | 1080 ± 10nm |
| A Optics | Pulse Width | 30-500ns (Adjustable) |
| A Optics | Repetition Frequency | 1-4000kHz (Adjustable) |
| A Optics | Single Pulse Energy | 1.5 / 2 / 5 / 10 / 15 / 50 / 100mJ |
| A Optics | Laser Brand | JPT (Standard) |
| A Optics | Fiber Length | 5m / 10m (Optional) |
| B Cleaning | Cleaning Efficiency | > 30 m²/h |
| B Cleaning | Max Working Area | 1200 x 1200mm (Customizable) |
| B Cleaning | F-Theta Lens | F300mm (DOF 15-25mm) |
| B Cleaning | Actuator Mechanism | Gantry + 5-Axis / 6-Axis Linkage |
| B Cleaning | Applicable Materials | Carbon Steel, Stainless Steel, Aluminum, Copper, Mold Steel, Stone, Wood |
| B Cleaning | Rust Removal Grade | Sa2.5 / Sa3 |
| C Motion | Structure | Dual-Drive Gantry (Large Format) |
| C Motion | Effective Stroke (X+Y+Z) | Fully Customizable |
| C Motion | Repeat Accuracy | ±0.01mm |
| C Motion | Motion Axes | 3-Axis Standard (5/6-Axis Optional) |
| C Motion | Guide Rails | HIWIN / THK / PMI |
| C Motion | Transmission | Linear Guide (X+Y) + Ball Screw (Z) |
| C Motion | Servo System | Delta / Inovance / Panasonic / Yaskawa |
Dual-drive gantry on linear guides: accuracy comes from the structure
A servo at each end of the beam, linear guides on X/Y (HIWIN / THK / PMI), a ball screw on Z, and +/-0.01 mm repeatability. The gantry carries the galvo anywhere over the table without losing stiffness with distance, which is why the same line quality holds at 200 mm and at 1200 mm.
S&A CWFL-2000 chiller: visible temperature, stable power
The CWFL-2000 beside the cabinet is a dedicated laser chiller reading 25.1 C on its own display. At the 1000 W level water temperature translates directly into power drift and lens life; air cooling cannot hold this range. It is not an option, it is the entry ticket.
A 1200×1200 table: clamp the part, run it once
The part is clamped to the table while the gantry runs an F300 lens (15-25 mm depth of focus) over the whole face, with an extraction hose taking the plume away. One set-up covers rust, paint and oxide in the same program, with no flipping and no hand touch-up.
Recipe library: a different operator, the same result
The screen shows a recipe table: power percentage, frequency, scan speed and line pitch per material, recalled with Load Recipe. Once locked, batch variation collapses to the +/-0.01 mm the machine holds – the certainty a handheld unit cannot offer.
Cross-section: clean surface, intact metal below
At a 50 micrometre scale the section shows the cleaned surface above and untouched base metal below, with a flat interface and no ablation pits or heat-affected layer. That is the evidence behind non-contact: it is what lets a thin-wall or precision part be cleaned this way.
Real parts: four materials, one clean boundary
Cast iron derusted, a timber beam stripped, copper de-oxidised, paint removed from sheet – four substrates and four contaminants, with the boundary stopping where the program set it and the substrate texture untouched. Same machine, same parameter logic.
Materials and process fit
| Material | What it removes | Note |
| Carbon and cold-rolled steel | rust removal to Sa2.5 / Sa3 | take heavy rust in passes |
| Stainless | heat tint, weld discolouration, oil | clean both sides before welding |
| Aluminium | oxide, release agent | low power, high frequency |
| Copper | oxide, oil | high reflectivity, more power needed |
| Mould steel | carbon build-up, release residue | tyre moulds; 5-axis for cavities |
| Stone and wood | deposits, old coatings | wood: low power, fast travel |
Boundaries
| Use | Why not |
| Oversize fixed parts | Will not fit the table; use a portable unit |
| One-off spot repair | The platform pays back on repeat work, not single parts |
| Mirror finishing | Cleaning removes deposits; it does not polish |
Cutting Samples
Send us an email to get further information you need, including our latest price, the best-customized solution, or any problem with the existing machine.
