



EMK D01 Bench Thorx7 Electric Marking Machine
OEM EMK D01 Stock Price Computerized Engraving Machine
An electromagnetic marking pin stylus,eliminates the need of any air supply.Widely used to mark on the metal or nonmetal materials.
Lower noise than the pneumatic marking machine.OEM EMK D01 Stock Price Computerized Engraving Machine
Applications
To be applied in Automobile, bodywork of motorcycle, car frame ,automotive chassis, engine, mechanical part, machine tool, metal pipe, gear, pump body, valve, various hardness plastic products, hardware part, Aeronautics, Electronics, war and light industry for marking steel, iron, copper, aluminum and plastic parts and various nameplate marking.
TAG:  electric marking machine
EMK-D01 ThorX 6 system electric dot peen marking machine with big power
An electromagnetic marking pin stylus,eliminates the need of any air supply.Widely used to mark on the metal or nonmetal materials.
Lower noise than the pneumatic marking machine.
Parameter
Marking speed:2-4 characters(2x2mm)/s
Stroke Frequency:300times/s
Marking depth:0.01 to 0.5mm (Vary to the material)
Marking contents :Alphanumeric info, Data Matrix or dot matrix 2D codes, Shift codes, Barcode, Serial Number, Date, VIN Code,Time, Letter, Figure, Logo, Graphics and etc.
Stylus Pin Hardness: HRA92/HRA93
Marking area:140x80mm ,(customized support)
Dimensions:340mm×440mm×350mm
Marking materials:below HRC60 metallic and nonmetallic materials ,above HRC60 need special stylus
Repeat accuracy :0.02-0.04mm
Power:300W
Work voltage:AC 110V 60HZ or AC220V 50HZ
Connection:2 USB and RS-232
Applications
To be applied in Automobile, bodywork of motorcycle, car frame ,automotive chassis, engine, mechanical part, machine tool, metal pipe, gear, pump body, valve, various hardness plastic products, hardware part, Aeronautics, Electronics, war and light industry for marking steel, iron, copper, aluminum and plastic parts and various nameplate marking.
TAG:  electric marking machine
Parameter
Marking speed:2-4 characters(2x2mm)/s
Stroke Frequency:300times/s
Marking depth:0.01 to 2mm (Vary to the material)
Marking contents :Alphanumeric info, Data Matrix or dot matrix 2D codes, Shift codes, Barcode, Serial Number, Date, VIN Code,Time, Letter, Figure, Logo, Graphics and etc.
Stylus Pin Hardness: HRA92/HRA93
Marking area:140x80mm (customized support)
Dimensions:340mm×410mm×780mm
Marking materials:below HRC60 metallic and nonmetallic materials ,above HRC60 need special stylus
Repeat accuracy :0.02-0.04mm
Power:300W
Work voltage:AC 110V 60HZ or AC220V 50HZ
Compressed Air( Pneumatic Air) :0.2-0.6Mpa
Connection:2 USB and RS-232
TAG:  electric marking machine