



Portable Handhold Dot Pin Marking Machine
Introduce
Portable Stand-alone marking machine ,with 7"LCD controller,NO NEED extra computer;
used conveniently,friendly software interface,very easy to use.
Pneumatic Mini suit for various chassis VIN marking.
.Dot Peen marking equipment, is a permanent, direct part marking process using a carbide pin
to indent the marking surface to form dotted lines, logos and 2D Data Matrix bar codes.
Advantage
Industrial marking system, ideal for making permanent marks on variety size of work pieces with
different surface, such as flat, curve, concave, convex, round. And also the inside of pipe and other
special place that hard to reach.Widely be used to mark on the metal or nonmetal materials.
Pneumatic dot peen marking styluses, besides normal marking inquiry, there are deep marking
stylus (0.1~1mm) and high hardness material (HRC60) marking.Multiple choice of controller: Mini PC
based controller, small size, easy to move and light weight; 7"LCD touch screen controller, insert
software, no need of PC.
Application
To be applied in Automobile, bodywork of motorcycle, car frame ,automotive chassis, engine, mechanical
part, machine tool, metal pipe, gear, pump body, valve, various hardness plastic products, hardware part,
Aeronautics, Electronics, war and light industry for marking steel, iron, copper, aluminum and plastic parts
and auto parts marking.
Parameter
Marking speed |
2-5 characters(2x2mm)/s |
Stroke Frequency |
300times/s |
Marking depth |
0.01 to 1mm (Vary to the material) |
Marking contents |
Alphanumeric info, Data Matrix or dot matrix 2D codes, Shift codes, Bar code, Serial Number, Date, VIN Code, Time, Letter, Figure, Logo, Graphics and etc. |
Stylus Pin Hardness |
HRA92/HRA93 |
Marking area |
40x80mm(customized support) |
Dimensions |
170x220x320mm(customized) |
Marking materials |
below HRC60 metallic and nonmetallic materials , above HRC60 need special stylus |
Repeat accuracy |
0.02-0.04mm |
Power |
300W |
Work voltage |
AC 110V 60HZ or AC220V 50HZ |
Compressed Air( Pneumatic Air) |
0.2-0.6Mpa |
Connection |
USB and RS-232 |
Controller |
a. 7"LCD touch screen controller b. windows 7&windows XP |
Power type |
a.Pneumatic b.Electric |
Marking directions |
up, down, left, right, and the circular arc surface marking |
Net weight |
3.2KG |
Software
Multi-languages, serial No., Arabic numerals, arbitrary figure, increment serial No., graphics,
VIN code, time, date, bar code reading marking, ticket, dot matrix, 2D code(two-dimension code),
circumferential parts marking and connected to database marking.
Available in a variety of languages (including English, French, German, Spanish, Swedish, Finnish,
Italian, Portuguese, Cyrillic and Czech), the software also contains features such as serial numbering, date and
time marking and password protection.Support multiple graphics and fonts,compatible with AutoCAD,
CorelDraw.Flexible and user-friendly software, compared with the same numbers.
Database: Marking report available, special fonts and graphics editor.
Settings
Advanced USB interface control technology
Taiwan HIWIN guide rods
Automatic System Trouble Analysis
Japan SMC high-frequency electromagnetic valve
Big torque, small angle stepper motor
High precision power driver
ThorX6 marking software
Rotary fixture supported
7"LCD touch screen controller
How to choose suitable marking stylus?
Stylus length---Pneumatic marking stylus
1. 30mm, 42mm, 45mm: suitable for portable marking machine
2. 56mm, 60mm: suitable for normal marking and bench top marking machine
3. 75mm, 76mm, 110mm: lengthened marking pin are mainly used for narrow parts marking
that normal marking pin hard to reach, such as modified motorcycle engine number etc.
Stylus diameter---Pneumatic marking stylus
a.Φ2, Φ2.5: suitable for aluminum etc. Low hardness products
b.Φ3, Φ4: suitable for normal marking requirements
c.Φ5, Φ6, Φ8: a certain depth requirements.
Electrical marking stylus:
Φ2.5, Φ3.5 for choose both model suits for aluminum and stainless steel metal marking.
Difference of USB PC controller and 7"LCD controller
7"LCD Touch Controller is used to manage and to monitor the marking head independently,
a separate unit to ensure it is protected from the mechanical shock loading of the marking
operation.Integrated marking software,marking files can be entered or edited directly with
the user friendly controller interface.It is ideal for stand alone marking systems,NO PC required.
Thanks to its USB plugs, marking files can be upload/download from a PC to the controller.
Create file and save it
User-friendly software interface,very simple to program
Built-in 7"LCD color touch screen ,Very large embedded graphical display,clearly marking preview
USB controller,with ThorX6 software which is a user friendly windows based program
for our marking system. It enables to secure automate and simplify to the maximum the user work,
communication via RS232 and 2USB
Spare parts
Marking Stylus,19 core connection cable,Data line for both USB port and R232 serial port,
Belts for marking head,Belt pulley, Limit switch,Air pressure valve,Spare up hand wheel,Foot paddle,etc.
After-sales Services
One year guarantee for main machine (People damaged are charged).
Full technical support\ by e-mail, call and video
Lifelong maintenance and spare parts supply.
Free design of fixtures as customers required.
Free training installation and operation for the staffs.
TAG:  VIN marking machine,handhold marking machine,portable marking machine,dot pin marking machine