.jpg)
.jpg)
High Wear Resistant Industry Diamond Marking Pin Needle For Alloy
Advantages
a.High hardness, low-cost, and durable
b.Pin tip can be polished,
c.It is a very economical consumable of pneumatic marking machine
D.deep marking and narrow marking supported
E-mail:daisyxiao@cqzixu.com.cn
Marking Machine Parts
Project & Case
QR code UV laser marking machine for packaging bag
ZIXU News
Description
High Wear Resistant Industry Diamond Marking Pin Needle For Alloy
ZIXU Manufacture Price Customized High Quality Electric Dot peen Marking Part
Advantages
a.High hardness, low-cost, and durable
b.Pin tip can be polished,
c.It is a very economical consumable of pneumatic marking machine
D.deep marking and narrow marking supported
Application
Automobile, bodywork of motorcycle, car frame ,automotive chassis, engine, mechanical part, machine tool,
metal pipe, gear, pump body, valve, various hardness plastic products, hardware part, Aeronautics,
Electronics, war and light industry for marking steel, iron, copper, aluminum and plastic parts and various nameplate marking.
Pneumatic marking pin (including spring, O-rings, stylus , pin cover)
How to choose Pneumatic marking pin?
(1) For the stylus size:
a.Φ2, Φ2.5: suitable for aluminum etc. Low hardness products
b.Φ3, Φ4: suitable for normal marking requirements
c.Φ5, Φ6, Φ8: a certain depth requirements
(2)For the stylus length:
a.30mm, 42mm, 45mm: ideal for portable marking machine
b.56mm, 60mm: suitable for normal marking and bench top marking machine
c.75mm, 76mm, 110mm: lengthened marking pin are mainly used for narrow parts marking that normal marking pin hard
to reach, such as modified motorcycle engine number etc.
Comment
1.To marking on high hardness (HRA60 and above)metals products , needed to use the diamond pneumatic marking pin.
2 .The life of the marking pin is depending on the frequency of usage, marking depth and the material of working piece.
|
Pin cover Material |
Aluminum (optional color), copper, cost iron |
|
Stylus material |
supper hard alloy |
|
Stylus hardness |
93HRA (68HRC) |
|
Marking material hardness |
≤ 60HRA (HRC30) |
|
Marking Objects |
plastic, iron, copper, aluminum and other metals |
|
Marking depth |
0.1mm-5mm |
|
stylus diameter |
Φ4 ( customized supported) |
|
Thread size |
M26,(customized supported), thread pitch 1mm |
|
Stylus length |
65mm (customized supported) |
|
Stylus head diameter |
10.7mm, 12.8mm, 16mm, 17.2mm (customized supported) |
|
Air Pressure |
0.3-0 .6 pa |
.jpg)
Online Message
If you have any suggestions or inquiry about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.
