Laser engraving machine processing transparent plastic materials

Author: zixu   Time: 2020/12/05

The product material is (transparent plastic material), the middle printing color (for example, red, green, etc.), the top coat is silver ink, and the logo effect needs to show the middle printing color.
The reference parameters are as follows: a): The marking frequency is set to low frequency, and the recommended value is between 8000-20000.
b): Set a larger launch time. For example: 55us.
c): Filling method: single line filling, spacing: 0.05mm
d): Scanning speed: between 700-1600. The recommended value is 900 mm/s.
Laser engraving machine
  • Tel
  • Mail
  • Top
  • Address
  • Inquiry
iccidojsjcjcg +86-18323847792