Portable fiber laser marking machine printing metal advantage

Author: zixu   Time: 2020/02/17

Portable fiber laser marking machine printing metal advantage

1. Permanent: for example, the marking mark will not disappear due to environmental relations (touch, acid and reducing gas, high temperature, low temperature, etc.). 2. Anti counterfeiting: the marks engraved by laser marking technology are not easy to copy and change, and have strong anti-counterfeiting to a certain extent. 3. Non contact: laser marking is processed by non mechanical "light knife", which can print marks on any regular or irregular surface, and the workpiece will not generate internal stress after marking, so as to ensure the original accuracy of the workpiece. No corrosion to the working surface, no "tool" wear, no poison, no pollution. 4. Wide applicability: laser processing means can be used to process a variety of metal and non-metal materials (aluminum, copper, iron, wood products, etc.).

portable fiber laser marking machine printing metal advantage

5. High carving precision: the laser marking machine carves fine lines, with a minimum line width of 0.04mm. The mark is clear, lasting and beautiful. Laser marking can meet the needs of printing a large amount of data on very small plastic parts. For example, two-dimensional barcodes with higher accuracy and clarity can be printed, which has stronger market competitiveness compared with the stamping or jet marking methods. 6. Low operating cost: fast marking speed and one-time mark forming, low energy consumption, so low operating cost. Although the equipment investment of laser marking machine is larger than that of traditional marking equipment, the cost of using laser marking machine is much lower. For example: ① marking with plastic triode: the working speed of laser marking machine is 10 / s, if the depreciation of equipment is calculated by 5 years, the marking cost is 0.00048 yuan / piece. If the pad printing machine is used, its comprehensive operation cost is about 0.002 yuan / piece, or even higher. ② bearing surface marking: if the bearing is typed in three equal parts, with a total of 18 No. 4 characters, the vibrating mirror marking machine is used, and the service life of krypton lamp tube is 700 hours, the comprehensive cost of marking for each bearing is 0.00915 yuan. The cost of electric corrosion lettering is about 0.015 yuan / piece. Based on the annual output of 4 million sets of bearings, if only one item is marked, the cost can be reduced by at least 65000 yuan in one year.

7. High processing efficiency. The laser beam controlled by computer can move at high speed (up to 5-7 M / s), and the marking process can be completed in seconds. 8. Fast development speed. Due to the combination of laser technology and computer technology, users can realize laser printing output as long as they program on the computer, and can change the printing design at any time, fundamentally replacing the traditional mold manufacturing process, providing a convenient tool for shortening the product upgrading cycle and flexible production.

TAG:  portable fiber laser marking machine printing metal advantage
  • Tel
  • Mail
  • Top
  • Address
  • Inquiry
iccidojsjcjcg +86-18323847792