Pneumatic marking machine marking depth more than 1mm
Author: zixu Time: 2018/03/22
Pneumatic marking machine marking depth more than 1mm
Many customers want to marking numbers and numbers on their steel parts in order to track the product,
but the steel material hardness is too hard to use 45 steel as an example, quenching hardness HRC45-50,
carburizing, surface hardness HRC>=60; Nitriding, surface hardness HB>=600. This depends on the thickness
of the carburized layer, generally 0.3---0.5mm, the thickness of the nitride layer is 0.15---0.2mm, general
pneumatic marking machine or electric No standard machine can meet this requirement.
If the cost of the machine is too high, the price of the sci machine can be used to buy a laser marking
machine. The scrib machine is too large to be able to make a portable machine and it is difficult for the customer
to carry the marking to the outdoors. Zixu's engineers developed a new type of portable pneumatic marking
machine that wasvery deep in 2018 at the request of customers.
TAG:  Pneumatic marking machine Marking depth 1mm Dot peen marking machine marking depth more than 1 mm