ZIXU News

Marking machine marking needle manufacturer for you to solve the marking needle problem

Author: zixu   Time: 2017/04/01

Marking machine marking needle manufacturer for you to solve the marking needle problem
In the pneumatic marking machine work, often encountered needle needle phenomenon, mainly due to the following reasons:
1, the increase in the friction between the needle and the sleeve of the needle, may be due to the needle and the needle suites have blocked objects, such as when the printing of aluminum chips, iron filings, etc., or needle and needle sets too dry.
2, air compressor out of the compressed air with oil, through the gas path to the needle set O type ring.
Common solutions include:
1, do not unload the needle sleeve, with a needle rod ordinary sewing machine oil can be directly coated on the outside; or if not, it may be a set of internal needle dirt stuck, as long as the removal of the needle by gas blowing in ladle clean or clean. Usually the latter possibility is very small, generally as long as first steps can be taken.
2, regular release of oil-water in oil-water separator, and rotating the needle sleeve, clean the oil on the O ring.
Welcome to our office web visiting www.cnmarking.com
Www.cnmarkermachine.com
 

Zixu Machinery content manager system | Zixu CMSZixu Machinery content manager system | Zixu CMS

  • Tel
  • Mail
  • Top
  • Address
  • Inquiry
iccidojsjcjcg +86-18323847792