Instructions for the Use of Pneumatic Marker
Chongqing Provides the instructions for the use of pneumatic marking machine at the beginning. There are pictures, text and video instructions, which are simple, detailed and easy to learn. Chongqing Initial Pneumatic Marking Machine, one-stop marking machine service provider around you.
Instructions for the use of pneumatic marker:
Equipment Installation and Debugging
When receiving the machine, check whether the parts are complete.
(Please check and accept according to packing list)
As shown in the figure, 1 is the controller part, 2 is the marker part and 3 is the 19-core aerial plug-in cable.
II. Equipment Connection
1. The connection of the controller part is as follows:
A: Connect 19-core aerial plug-in cable
B: Connect to the outlet of the pressure regulating valve.
2. The pressure regulating valve part is connected as follows:
A: Inlet end
B: Exhaust end
Pressure regulating valve is recommended to use 0.4-0.5mpa air pressure
3. The controller part is connected as follows: